FLUX Beamo II Honeycomb Laser Replacement Platform
Replace the cutting bed on your FLUX Beamo II with the official Beamo II honeycomb platform. This is the open-cell table the laser sits on when you cut wood, acrylic, leather, cardboard, and fabric. A clean honeycomb supports the sheet, lets exhaust and air assist pull debris down, and helps keep scorch off the back of the work.
Use it as a spare, or swap it in when the original bed is warped, coated in residue, or full of cut marks. The Beamo II ships with a honeycomb. This listing is the replacement size for that machine: 15.8" × 11.0".
This honeycomb cutting platform excels in a variety of applications, from crafting custom signs and personalized gifts to prototyping small-batch products. By elevating your materials slightly, it promotes better laser focus and reduces reflections that could harm the engraver's internals. Users praise its role in achieving professional-grade results, with reviews highlighting improved cut quality and easier post-processing compared to flat beds.
It does not fit the original FLUX Beamo (that bed is 12.6" × 10.24"). It does not fit Beambox, Beambox II, or HEXA.
Why you want a honeycomb on the Beamo II
- Holds thin acrylic, plywood, and paper flat so the cut does not sag
- Open cells let the beam and smoke pass through instead of bouncing off a solid floor
- Less backside burn and fewer melt marks on the underside of the sheet
- Easy to lift out for cleaning, or to remove when you need more height
On the Beamo II, material height is about 7 mm with the honeycomb in and about 30 mm with it out. For taller objects, add the Beamo II Extension Base (up to about 155 mm).
When to replace the bed
Order a new platform if the current one is sticky with smoke residue, bent, or so cut-up that small parts fall through. A fresh bed is cheaper than reprinting jobs that scorch on the back.
What's included with your FLUX Beamo II Honeycomb Platform: one aluminum honeycomb cutting bed. Installation is simple—place it directly into the Beamo's work area for immediate use. For best results, pair it with optional add-ons like the autofocus module or rotary attachment to expand your creative capabilities.
Compatibility
| Machine | Fits this honeycomb? |
|---|---|
| FLUX Beamo II | Yes |
| Original FLUX Beamo | No — different size |
| Beambox / Beambox Pro / Beambox II | No |
Specs
| Spec | Detail |
|---|---|
| Product | FLUX beamo II honeycomb |
| Platform size | 15.8" × 11.0" |
| Machine work area | 360 × 240 mm (14.2" × 9.4") CO2 |
| Height with honeycomb | ~7 mm |
| Height without honeycomb | ~30 mm |
| Typical use | Cutting and engraving support bed |
| Installation | Drops into the Beamo II work area |
Who this is for
Beamo II owners who cut daily, shops that want a clean spare bed ready to swap, and anyone whose original honeycomb is too dirty to get a clean underside on acrylic or plywood.
Buy from Swing Design
Get the Beamo II honeycomb with filters, rotaries, and other official-size FLUX add-ons in one U.S. order. We help you avoid first-generation Beamo parts on a Beamo II.