Personalize these sublimation keychain blanks with photos or designs! Perfect for personalized gifts and products to sell. Each 2 sided blank comes with metal key ring & plastic snap ring. Designed with Fiber-reinforced plastic (FRP). Heat transfer vinyl (HTV) and adhesive vinyl can also be applied to these sublimation keychain blanks.
Download free sublimation template
Specifications
-
SIZE : 2.5" x 2.25" (57.2mm x 63.5mm)
- SUBSTRATE : Fiber reinforced plastic (FRP)
- THICKNESS : 0.09" / 2.29mm
- COATING : White
- FINISH : Gloss
Volume Pricing
- Pack of 10 Keychains $1.45 / Keychain
- Pack of 50 Keychains $1.42 / Keychain
- Pack of 100 Keychains $1.37/ Keychain
Materials needed -
- Unisub Fiber-reinforced Plastic (FRP) Key Chain Blank
- Sublimation Printer
- Heat Press
- Heat Tape
- Cleaning Cloth
- Blowout Paper (teflon sheet not recommended)
- Printed Transfer
- Printing RIP Software
- Heat Gloves
- All-Purpose Cleaning Fluid
Directions -
- Clean the keychain using microfiber cloth, all-purpose cleaner, and/or compressed air
- Place keychain (coating side down) onto printed transfer sheet. Maintaining appropriate bleed for your blank, use heat-proof tape to attach the keychain to the transfer sheet.
- Flip taped transfer/blank (blank coating will be face up at this point, but covered from view by the transfer paper) and place it in the heat press between the two layers of blowout paper.
- Press the keychain for the recommended time and temp. When the time is up remove everything from the heat press. Attention: the item will be hot, so wear protective heat gloves for removal.
|
Product
|
Temperature
|
Both Sides at a Time
|
One Side at a Time
|
|
Fiber Reinforced Plastic (FRP) Keychain
|
400°F/195°C
|
1:30
|
1:20
|
*The stated sublimation times are only valid for prints made on small desktop sublimation printers.
INSTRUCTIONS
