Heat Presses 15" x 15" | 8-In-1 Swing Away | Swing Design

Swing Design 15" x 15" Swing Away 8-in-1 Heat Press - White

Swing Design's 15" x 15" Swing Away 8-In-1 Heat Press is a budget friendly high quality press designed to tackle all your heat transfer, DTF, and sublimation needs.  This multi-function heat press includes our most popular sized 5" x 15" heat platen.  In addition, the 8-In-1 includes a hat & cap press, 2 plate presses, 4 mug presses along with a mug pressing unit.  This combo press is great for applying heat transfer vinyl and sublimation products to a wide variety of fabrics, materials, and sublimation blanks. Works with t-shirts, tote bags, towels, rhinestones, canvas, thin wood, mugs, tapered mugs, coasters, plates, hats, sequin pillows, and many other items.  With a max temp of 480°F this press is sure to tackle any craft project.

ADDITIONAL USER VIDEOS FOUND HERE

INCLUDED
  • 15" x 15" Swing Away Heat Press - White
  • 15" x 15" Silicon Removable Rubber Base Mat
  • Hat Press Attachment 6" x 3"
  • Plate Press #1 - 5" Max Diameter
  • Plate Press #2 - 6" Max Diameter
  • Mug Press Base Attachment 
  • Mug Attachment Large (installed)
  • Mug Attachment Small
  • Conical Tumbler Attachment Tall
  • Conical Latte Attachment Short
  • Phillips Head Screwdriver 
FEATURES
  • Temp Range: 0°F to 480°F
  • Advanced Heat Platen to ensure even heat distribution
  • Teflon-Coated Platen
  • Pressure Adjustment Knob
  • Built-in Safely Fuse
  • Digital Temp & Time
  • Heat Resistant Handle
  • Count Down Timer with Alarm - 0 to 999 Seconds
  • Solid Steel Construction
  • Voltage 110V
  • In Packaging: 75lbs | 23" x 18'5" x 18.9"
  • Lifetime Support
  • 1 Year Warranty
  • $200 in So Fontsy Designs - SVGs, JPGs, Commercial Use (Choose from 5,000+ Designs with new content added daily. Valid on the card redemption portion of the site.)

SWING DESIGN 8-IN-1 HEAT PRESS MANUAL


Related Items

Questions & Answers
avatar
Popular Questions

6 months ago
When I heat press my shirts it does it unevenly. I notice that it is too wiggle and it unevenly heat presses my items. See more »
6 months ago

It sounds like you need to adjust the overall height of the top platen. First, remove the black knob and bolt underneath from the main swivel of the 8-in-1. Once you've done this, you'll see a large main screw bolt that runs through the machine (there is a washer as well). At the bottom of that internal screw there are two hexagonal bolts. One has a screw in the side of it. Loosen that screw and it will allow both of those bolts to be loosened. By rotating the long internal screw bolt you should be able to raise the overall height of the screw and washer, so that when you put…

See full answer »
0 | 0
4 months ago
4 months ago
While Parallels are an alternative, most DTF machines are not Mac compatible. The Epson F1070 and the F2270 are the only DTF capable machines that are Mac compatible.
0 | 0
View all

Shopper Approved Q&A Shopper Approved Q&A Answerbase
view